If you're new here, you may want to subscribe to my RSS feed .如果你來這裡，你可以訂閱我的rss的飼料。 Thanks for visiting!感謝來訪！
Adjusting Eyebrows to beautify a face using Photoshop調整眉毛，以美化臉用的photoshop
In This Photoshop tutorial will now provide you some basic steps involved in adding beauty to the face.在這photoshop的補習，現在你提供了一些基本的步驟，參與加入美容給面子。 Let’s use a small thumbnail as shown for this tutorial.讓我們用一個小縮略圖顯示本教程。 We will correct this in Photoshop with a Levels Adjustment Layer.我們將正確的，這在photoshop中同級別的調整層。
Click on the Create a new fill or adjustment layer icon and select Levels.點擊就創造一個新的填充或調整層的圖標，並選擇水平。 You'll notice when you look at the Levels histogram that this black graphic representation stops before it reaches the end.你也將注意到當你看到在各級直方圖，這黑色的圖形代表性站才到達目的。 This is an indication that the image is too dark.這是一個跡象表明，圖像太暗。 Click on the white slider and move it towards the end of the histogram and click OK to fix our problem.點擊白色滑塊移至接近年底直方圖並單擊確定，以確定我們的問題。
The next step is to fix the eyebrows.下一步的工作是要確定眉毛。 First add a new layer by clicking on the Create a new Layer icon in the layers palette.首先增加一個新的層，然後點擊創建一個新的層圖標，在層調色板。 Rename this layer to Left Eyebrow by double clicking on its name.重命名這層到左眉毛雙點擊它的名字。 In this window you can change the name of the layer or give the layer a color in the layers palette.在此窗口您可以更改姓名的層或給予層顏色，在層調色板。 Whether you rename the layer by double clicking on its name or by entering the name in the New Layer window is all up to you.你是否更名層中雙擊文件名就其名稱或進入名義，在新的層窗口是所有要看你了。 Continue by selecting the Clone Stamp Tool in the tool bar and checking the options bar.繼續選擇克隆集郵工具，在工具欄和制衡選擇酒吧。
Make sure that your Clone Stamp options look the same.確保你的克隆郵票選擇看相同的。 In the option bar you'll notice that a particular brush was chosen.在選擇酒吧，您會看到某個刷被挑選的。 Click on the button with the black triangle and select a Master Diameter of 9 px and a Hardness of 0%.點擊這個按鈕，用黑三角，並選擇碩士直徑9對外關係和硬度的0 ％ 。
By selecting the option Aligned in our options bar our target and source of the Clone Stamp Tool will always be aligned at any time, as if they are glued together; if you move the mouse pointer up then our 'virtual source' will move up, move it to left and the virtual source will move to the left too.擇優選擇不結盟，在我們的選擇律師，我們的目標和來源的克隆集郵工具將始終保持一致，在任何時候，就好像他們是粘在一起，如果你在動議鼠標指針了，然後我們的'虛擬源' ，將上移，它移動到左和虛擬源將移師左太。
With the Clone Stamp Tool selected, hold down the Alt key (option key on the Mac) and move the cursor to the area marked.與克隆集郵工具選擇，降低運行環境（選擇鍵陸委會）和移動游標到該地區顯著。 Press and release your left mouse button.新聞發布您按下鼠標左鍵。 Zoom in to about 300%.放大至約300 ％ 。
What we're going to do now is cloning the skin above the eyebrow and use it to hide the upper area of the eyebrow, since me want to make the eyebrow took smaller.我們正在做的，現在是克隆皮膚之上，眉毛，並用它來掩蓋上層面積的眉毛，因為我不想使眉毛了變小了。 We do that by following the curve as marked with the top red arrow.我們這樣做是由以下的曲線作為標明頂部紅色箭頭。 If you don't have a steady hand, then you might consider following the curve by using single clicks.如果你沒有一個穩定的手，那你可能會考慮效法曲線採用單一的點擊次數。 Once you're done you move the cursor back to location, but this time you start slightly lower, a distance that's only slightly smaller than the size of our cursor.當你做了你移動游標回到位置，但這個時候你開始略有下降，距離這只是略小於大小我們游標。 Now you're going to repeat the same step again; following the curve and hiding the hairs of the eyebrow with the cloned skin.現在你再重複相同的步驟，再經過曲線和隱瞞瑣細的眉毛與克隆皮膚。
Depending on the size of your brush my might have to do this 2,3 or 4 times, every time starting slightly lower.視乎大小的畫筆，我可能要做到這一點2,3或4次，每次出發略低。
The errors can be corrected by using the Clone Stamp to clone skin from different source areas.這個錯誤可以更正，利用克隆郵票克隆皮膚，從不同的源區。 When you do that you might consider to lower the opacity a bit, to around 50% and use a當你這樣做，你可以考慮以降低混濁了一點，以50 ％左右，並用
slightly larger.稍大。 Another option is to use the Healing Brush Tool which keeps lighting and color as much as possible intact, but avoid to use the Healing Brush too close to the edge between eyebrow and skin or the results are going to be unpredictable.另一個選擇是使用癒合刷工具，它使光線和色彩，盡可能多地完整，但避免使用癒合刷太接近邊緣之間的眉毛和皮膚或結果都將不可預測。
Lock the Left Eyebrow layer when you're finished by making it active and clicking on the lock icon at the top of your layers palette.船閘左邊眉毛層時，你已經完了，使積極和點擊鎖定圖標在頂部你的層調色板。 Do the same for the Right Eyebrow layer.做同樣為右眉層。 You can now look a new face built up.現在你可以看看有新面貌，建立起來。 Compare with the original image to feel the change!比較原始圖像感受到變革！
Links you may find interesting -聯繫你可能會覺得有趣-
- How to remove the Roughness Present on the Skin of a Picture and How to make it smooth using Photoshop 如何去除粗糙度目前對皮膚的照片，以及如何使之順利用的photoshop
- How to Create an old postage stamp using Photoshop 如何創造一個老郵票用的photoshop
- Beginners Tutorial on Photoshop layers - How to do Layering in Images 初學者補習上的photoshop層-如何做分層圖像
- How to Create a Ghost like face using Photoshop 如何創造一個幽靈一樣，面對用的photoshop
- How to Create Real Clouds using Adobe Photoshop 如何創造真正的雲彩使用adobe的photoshop
