If you're new here, you may want to subscribe to my RSS feed .如果你来这里，你可以订阅我的rss的饲料。 Thanks for visiting!感谢来访！
Adjusting Eyebrows to beautify a face using Photoshop调整眉毛，以美化脸用的photoshop
In This Photoshop tutorial will now provide you some basic steps involved in adding beauty to the face.在这photoshop的补习，现在你提供了一些基本的步骤，参与加入美容给面子。 Let’s use a small thumbnail as shown for this tutorial.让我们用一个小缩略图显示本教程。 We will correct this in Photoshop with a Levels Adjustment Layer.我们将正确的，这在photoshop中同级别的调整层。
Click on the Create a new fill or adjustment layer icon and select Levels.点击就创造一个新的填充或调整层的图标，并选择水平。 You'll notice when you look at the Levels histogram that this black graphic representation stops before it reaches the end.你也将注意到当你看到在各级直方图，这黑色的图形代表性站才到达目的。 This is an indication that the image is too dark.这是一个迹象表明，图像太暗。 Click on the white slider and move it towards the end of the histogram and click OK to fix our problem.点击白色滑块移至接近年底直方图并单击确定，以确定我们的问题。
The next step is to fix the eyebrows.下一步的工作是要确定眉毛。 First add a new layer by clicking on the Create a new Layer icon in the layers palette.首先增加一个新的层，然后点击创建一个新的层图标，在层调色板。 Rename this layer to Left Eyebrow by double clicking on its name.重命名这层到左眉毛双点击它的名字。 In this window you can change the name of the layer or give the layer a color in the layers palette.在此窗口您可以更改姓名的层或给予层颜色，在层调色板。 Whether you rename the layer by double clicking on its name or by entering the name in the New Layer window is all up to you.你是否更名层中双击文件名就其名称或进入名义，在新的层窗口是所有要看你了。 Continue by selecting the Clone Stamp Tool in the tool bar and checking the options bar.继续选择克隆集邮工具，在工具栏和制衡选择酒吧。
Make sure that your Clone Stamp options look the same.确保你的克隆邮票选择看相同的。 In the option bar you'll notice that a particular brush was chosen.在选择酒吧，您会看到某个刷被挑选的。 Click on the button with the black triangle and select a Master Diameter of 9 px and a Hardness of 0%.点击这个按钮，用黑三角，并选择硕士直径9对外关系和硬度的0 ％ 。
By selecting the option Aligned in our options bar our target and source of the Clone Stamp Tool will always be aligned at any time, as if they are glued together; if you move the mouse pointer up then our 'virtual source' will move up, move it to left and the virtual source will move to the left too.择优选择不结盟，在我们的选择律师，我们的目标和来源的克隆集邮工具将始终保持一致，在任何时候，就好像他们是粘在一起，如果你在动议鼠标指针了，然后我们的'虚拟源' ，将上移，它移动到左和虚拟源将移师左太。
With the Clone Stamp Tool selected, hold down the Alt key (option key on the Mac) and move the cursor to the area marked.与克隆集邮工具选择，降低运行环境（选择键陆委会）和移动游标到该地区显着。 Press and release your left mouse button.新闻发布您按下鼠标左键。 Zoom in to about 300%.放大至约300 ％ 。
What we're going to do now is cloning the skin above the eyebrow and use it to hide the upper area of the eyebrow, since me want to make the eyebrow took smaller.我们正在做的，现在是克隆皮肤之上，眉毛，并用它来掩盖上层面积的眉毛，因为我不想使眉毛了变小了。 We do that by following the curve as marked with the top red arrow.我们这样做是由以下的曲线作为标明顶部红色箭头。 If you don't have a steady hand, then you might consider following the curve by using single clicks.如果你没有一个稳定的手，那你可能会考虑效法曲线采用单一的点击次数。 Once you're done you move the cursor back to location, but this time you start slightly lower, a distance that's only slightly smaller than the size of our cursor.当你做了你移动游标回到位置，但这个时候你开始略有下降，距离这只是略小于大小我们游标。 Now you're going to repeat the same step again; following the curve and hiding the hairs of the eyebrow with the cloned skin.现在你再重复相同的步骤，再经过曲线和隐瞒琐细的眉毛与克隆皮肤。
Depending on the size of your brush my might have to do this 2,3 or 4 times, every time starting slightly lower.视乎大小的画笔，我可能要做到这一点2,3或4次，每次出发略低。
The errors can be corrected by using the Clone Stamp to clone skin from different source areas.这个错误可以更正，利用克隆邮票克隆皮肤，从不同的源区。 When you do that you might consider to lower the opacity a bit, to around 50% and use a当你这样做，你可以考虑以降低混浊了一点，以50 ％左右，并用
slightly larger.稍大。 Another option is to use the Healing Brush Tool which keeps lighting and color as much as possible intact, but avoid to use the Healing Brush too close to the edge between eyebrow and skin or the results are going to be unpredictable.另一个选择是使用愈合刷工具，它使光线和色彩，尽可能多地完整，但避免使用愈合刷太接近边缘之间的眉毛和皮肤或结果都将不可预测。
Lock the Left Eyebrow layer when you're finished by making it active and clicking on the lock icon at the top of your layers palette.船闸左边眉毛层时，你已经完了，使积极和点击锁定图标在顶部你的层调色板。 Do the same for the Right Eyebrow layer.做同样为右眉层。 You can now look a new face built up.现在你可以看看有新面貌，建立起来。 Compare with the original image to feel the change!比较原始图象感受到变革！
Links you may find interesting -联系你可能会觉得有趣-
- How to remove the Roughness Present on the Skin of a Picture and How to make it smooth using Photoshop 如何去除粗糙度目前对皮肤的照片，以及如何使之顺利用的photoshop
- How to Create an old postage stamp using Photoshop 如何创造一个老邮票用的photoshop
- Beginners Tutorial on Photoshop layers - How to do Layering in Images 初学者补习上的photoshop层-如何做分层图像
- How to Create a Ghost like face using Photoshop 如何创造一个幽灵一样，面对用的photoshop
- How to Create Real Clouds using Adobe Photoshop 如何创造真正的云彩使用adobe的photoshop
